Skip to main content

Blog

Motor Assembly Removal

Motor Assembly Removal

We’re working to get more people capable of updating their Sota Turntables in the field.  Shipping is expensive and the risk of damage is real.   In this video we...

Platter Removal

Platter Removal

In order to remove your platter from any Cosmos, Nova, Star, or Sapphire you will need the following tools: 3/32 Allen Wrench for the 2 transit screws, flathead screwdriver for...

Heritage Series Table Setup

Heritage Series Table Setup

This is the same procedure for Sapphire, Nova, Star, Cosmos. Once correct weight is in tonearm well, adjust the feet so the sub chassis floats but the platter is level...

Sota Pyxi Phonostage Now Available

Sota Pyxi Phonostage Now Available

Sota Turntables has always been known for suspension turntables that are capable of performing in environments that are not friendly to most turntables.  In the past, Sota did make speakers...

Aftermarket Non-Sota Eclipse Packages

At this point we’ve done quite a few upgrades for Non-Sota Turntables. We’ve done VPI Prime with aluminum, stainless motor housing. Each needs different levels of machining which we are...

SOTA Brings Speed Control to a New Level

SOTA Brings Speed Control to a New Level

Our Series VI Sapphire was released and many upgrades were done to these tables.  One of the biggest upgrades was the VI series drive control which was designed by Bill...

Welcome to the All-New SOTA

Welcome to the All-New SOTA

With Munich around the corner, we’ve decided to launch the website and move forward, while letting you know what we’ve been working on the past two years. January 2nd of...